Motor and Pedal Sewing Machine Household

Description Motor and Pedal Sewing Machine Household

Engine and pedal sewing machine. Listed price is piece.
Code: MOTOR-YDK-120W
Quantity: 1 piece
Description: Pedal and belt motor for sewing machine
Engine Information:
- power supply (220 V),
-power (120 W),
-Frequency current (50-60Hz),
-7000 r / m,
-electric current (0.6A)

LIST OF MOTOR AND ACCESORIES OF SEWING MACHINE:

    MOTOR 4. 9/32 "SURB

    PEDALA ELECTRICA 5. CARBON

    COURSE 6. SAIBA

INSTALLING:

When using a sewing lamp, make the following links as follows:

A) loosen the screws (a) and (b) at the motor socket connector and remove it

B) Connect the ends of the lead / main lead of the lamp to the terminals marked "L" and "ML"

 Installing the engine

A) Set the engine temporarily.

B) install the strap

C) The strap must not be too tight or too wide. The belt tension can be adjusted by the engine stop screw and the support bolt on the arm.

D) tighten the screws after making the adjustment.

Operation

1. The anointing

A) Insert the pedal plug (female) into the engine socket (male)

B) Insert the plug into the container

C) firmly press the control pedal, the engine will start to rotate, the engine speed being controlled by the pressure applied to the pedal.

The sewing machine's engine uses a high-quality, metal-free metal so that only one or two drops of sewing machine oil must be added to the oil port every 6 months.

2. Changing the charcoal brush when worn

A) remove the engine by weakening the screw that secures the arm

B) Remove 2 brush caps, not cover, and remove the used carbon brush

C) Insert the new charcoal brush and put the covers in place

D) Reinstall the engine by adjusting the tension of the belt