Spray Adhesive, 200 ml

Description Spray Adhesive, 200 ml

Contact adhesive as a spray. Listed price is per piece.
Code: SPRAY-BISON
Quantity: 1 piece
Packaging: 200ml
Folds paper, cardboard, photos, posters, felt felt, cork, glass wool, tempex foam, aluminum foil with both sides, and wood surfaces, bottles, palm, agglomerated boards, cardboard and metal.
- For temporary and permanent fixation;
- Easy to use;
- Fast and powerful;
- It shows resistance to moisture.

Directions for use: Shake the spray well before application. 
Temporary bonding:

• 1. Spray a thin but uniform layer on one of the surfaces at a distance of approximately 25cm (hold the aerosol in the upright position and fully press the sprayer). 
• 2. Allow to dry for at least 20 minutes 
• 3. Combine the surfaces and press firmly. The surfaces become self-adhesive and can be detached and fixed again. You can mix the surfaces immediately after applying the adhesive. Position adjustments can be made within 5 minutes. The drying time is approx. 24 hours.  

Permanent bonding:

• 1. Spray a thin but uniform layer on both surfaces at a distance of about 25cm (hold the aerosol in the vertical position and fully press the spraying system.) 
• 2. Let it dry for at least 10 minutes. Pressure firmly Position adjustments can not be made any further After use, clean the nozzle by holding the spray head down and press the button until the gas is drained This prevents clogging of the nozzle.